|
AUTO RE-LEARN
Auto re-learn TPMS means the vehicle
automatically relearns the tire pressure sensor positions after tires are
rotated, replaced, or pressures are adjusted. You do not need a special tool.
After driving the car for a short time at a steady speed, the system detects
each sensor and assigns it to the correct wheel location. Once learning is
complete, the TPMS light turns off and the system works normally again.
Refer to Owners manual for in dept
instructions .
-Set all tires to the correct
pressure shown on the door sticker.( Add Pic)
-Turn the ignition on (engine off) or
start the vehicle, depending on model.
-Drive the vehicle at a steady speed
(about 30–50 mph / 50–80 km/h) for 15–25 minutes.
The TPMS light should turn off once
relearn is complete.
|
