Home > All Products > TPMS by Vehicle Make > Buick TPMS > 2007 Buick TPMS > 2007 Buick Allure TPMS >

SE10007 Continental VDO TPMS Sensor Redi Sensor

SE10007 Continential VDO TPMS Sensor Redi Sensor
Our Price: $69.98
Frequency: 315 mhz
OEM Part Number: SE10007
Vehicle Make and Models Covered: Universal TPMS Sensor - Multi Protocol

Availability: In Stock
Product Code: SE10007-VDO

Valve Stem Option (VDO)*:

Description Additional Product Info
SE100017 Continental VDO TPMS Sensor Redi Sensor

The SE10007 VDO REDI-Sensor is:

  • Multi protocol
  • Value priced alternative to your OEM TPMS sensor

VDO REDI-Sensor is a TPMS sensor that has your shops bottom line in mind. Easy to use and no programming tools required. The SE10007 is a drop in, Relearn, and Go TPMS sensor

Because REDI-Sensor is designed to follow OE vehicle relearn procedures, no extra programming steps or investments in special tools and software are needed. If a shop has the TPMS scan tools and know-how to handle OE sensors, it’s ready for REDI-Sensor!

Are you looking for a TPMS replacement solution that requires minimal investment in tools? The SE10007 Continental VDO Redi Sensor is a universal sensor designed to work with original equipment learning procedures. There’s no need for cloning software or loading specific vehicle software and protocols. The sensor also wakes up faster than competitors, keeping the vehicle computer from timing out in relearn mode.

The VDO SE10007 Redi-Sensor broadcasts at 315 MHz. A pre-programmed Redi Sensor can be used on vehicles from GM, Ford, Chrysler, Hyundai, Mazda, Mitsubishi and Nissan. That means one VDO TPMS sensor can replace multiple SKUs, simplifying your inventory. This sensor replaces an increasing list of OEM SKUs. Contact one of our sales managers for a current list. We offer this sensor with silver, black and gunmetal valve stems.

All of our parts are OES (Original equipment supplier) meaning they are the same genuine parts found on your vehicle when it was produced.

Sensors come complete with all required parts to install on to wheel. ***TPMS should always be installed by Trained Professionals***

For assistance finding the correct parts for your vehicle contact us at [email protected] or call 1+(714) 692-TPMS (8767)


GM, Ford, Chrysler, Hyundai, Mazda, Mitsubishi, Nissan

REDI-Sensor makes TPMS service faster, easier and more profitable. TPMS service has grown more and more complex, with competing sensor standards, multiple scan and trigger tools, expensive equipment and software updates. Now, the VDO REDI-Sensor brings simplicity, ease of installation and better profit potential to TPMS service. REDI-Sensor is a technological breakthrough based on the concept of having one TPMS sensor preprogrammed to work with multiple makes and models.

Works with all major TPMS scan tools. Look no further – REDI-Sensor is the TPMS service solution that the aftermarket has been waiting for! It’s simple. Take REDI-Sensor out of the box, install it, and follow the OE vehicle relearn procedure – that’s it! Unlike competitive sensors, there is never a need to ‘clone’ or to load vehicle software / protocols to a blank ‘universal’ sensor. These steps take specialized programming tools, which add time, cost and complexity.

Ready to install right out of the box. REDI-Sensor requires no special sensor programming and relearns to the vehicle just like an OE sensor. While competitive multi-application and universal programmable sensors require the added cost of specialized sensor programming tools, software, and labor to program or clone a blank sensor, REDI-Sensor comes ready to go onto the vehicle, right out of the box.

Faster hunt mode. REDI-Sensor saves valuable time during the vehicle relearn process, when using TPMS scan tools that incorporate a hunt mode. REDI-Sensor uses an ‘intelligent design’ to wake faster and deliver positive results sooner. This helps prevent the vehicle relearn process from timing out, which eliminates the need to redo the procedure.

Enhanced tire / wheel components. The REDI-Sensor pivoting valve stem angle, combined with technically superior valve stem hardware / sealing components, maximizes wheel compatibility.

Less inventory for parts providers. VDO REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in types from Beru, Continental, Lear, Pacific, Schrader, Siemens VDO and TRW. With REDI-Sensor, parts stores can substantially reduce the number of sensor SKUs required to provide full TPMS coverage and eliminate costly service delays. Parts stores can also deliver REDI-Sensor without worrying whether their customers have the TPMS scan tools necessary to work with it, because if they have the tools and know-how to work with OE sensors, they’re ready for REDI-Sensor.

Eliminates lost service opportunities. Service shops only need to keep a small supply of REDI-Sensors on hand to be ready to service practically any vehicle that comes in. No waiting for a part delivery and no lost sales to drivers that can’t leave their vehicle.

Broad and deep TPMS application coverage. VDO REDI-Sensor provides multi-application coverage for a broad range of cars, vans, SUVs, crossovers and light trucks from 2002 – 2014. Expanded Audi, GM truck (PWM), Mercedes, Volkswagen, Volvo, Subaru and even more Asian vehicle coverage available now!
Only 4 REDI-Sensor sensor assemblies provide extensive coverage for domestic, Asian and European cars, trucks, SUVs, crossovers and vans, replacing over 200 OE sensors … and counting! The hundreds of new applications covered by REDI-Sensor have been added to the already broad and deep coverage of the VDO OE TPMS Replacement Parts Program.
Continually expanding coverage - With VDO REDI-Sensor, we are researching and validating new vehicle applications daily – ensuring that our REDI-Sensor coverage continues to grow, and our customers are ready for whatever vehicle enters the bay!

Reliable, long-standing OE partner.Continental is a market leader and pioneer in the design and manufacturing of OE TPM Systems, sensors, and tires. Our heritage of trust and innovation was not built overnight. For over a century, Continental has been recognized as a committed partner in the automotive industry.

OE engineering for the aftermarket:

  1. VDO multi-application sensor technology easily syncs with a variety of vehicles
  2. Ready out of the box! Pre-programmed and designed to follow OE vehicle relearn procedures
  3. Valve core, stem and hex nut treated against corrosion
  4. Valve cap seal minimizes air loss
  5. Pivoting valve stem makes installation easier and accommodates a wide range of wheel rim profiles
  6. Robust waterproof design resists tire air moisture
  7. Technically superior valve sealing design

REDI-Sensor service parts. VDO REDI-Sensor replacement parts and service kits are available and include valve core, valve nut, seal, seal washer, and valve cap. Replacements are also available for the sensor’s durable metal valve stem, which is reusable.

Share your knowledge of this product. Be the first to write a review »