Home > All Products > TPMS by Vehicle Make > Mitsubishi TPMS
Choose a sub category:
2003 Mitsubishi TPMS
2004 Mitsubishi TPMS
2005 Mitsubishi TPMS
2006 Mitsubishi TPMS
2007 Mitsubishi TPMS
2008 Mitsubishi TPMS
2009 Mitsubishi TPMS
2010 Mitsubishi TPMS
2011 Mitsubishi TPMS
2012 Mitsubishi TPMS
2013 Mitsubishi TPMS
2014 Mitsubishi TPMS
2015 Mitsubishi TPMS
2016 Mitsubishi TPMS
2017 Mitsubishi TPMS
2018 Mitsubishi TPMS
2019 Mitsubishi TPMS
2020 Mitsubishi TPMS
2021 Mitsubishi TPMS
2022 Mitsubishi TPMS
2023 Mitsubishi TPMS
What is MITSUBISHI TPMS?

MITSUBISHI Direct TPMS, Tire Pressure Monitoring Sensors, are a warning system that warns a vehicle's operator of an unsafe change in the air pressure in one or more of the tires. MITSUBISHI TPMS readings are provided by pressure sensing transmitters ,TPMS, mounted inside each tire and sent to a central computer (ECU) for display on the dashboard. A warning indicator light on the instrument panel and an MITSUBISHI trouble warning notify the driver if a 25% drop in pressure occurs.
How do I know if my MITSUBISHI vehicle is equipped with TPMS?

In the U.S., if you purchased a car or light duty vehicle under 10,000 lbs, manufactured after September 1, 2007, you have TPMS. If your model was manufactured after October 5, 2005, you may have TPMS. Also, prior to the legislation, some higher-end vehicles also came equipped with TPMS as a premium option.

When You See the MITSUBISHI TPMS Tire Pressure Alert

When your MITSUBISHI TPMS warning light comes on, please exercise caution. This means that one or more of your tires may be at least 25% below recommended inflation pressure.

   Find a safe place to pull out of traffic so you can stop to check your tires. NOTE: If you are driving at higher speeds (highway), immediately take firm hold of the steering wheel with both hands because, in the event that you are experiencing a blowout (rapid deflation), you'll need to be prepared to handle your vehicle. Then, slowly decelerate and move out of traffic.
   Once you have checked to ensure you are not having a blowout, use a tire gauge to check the pressure of each tire against your manufacturer's recommended pressure level. (A tire gauge should be a standard component within your set of emergency items in your vehicle.) The recommended pressure level can be found on the tire placard, a label located just inside the driver's side door on MITSUBISHI vehicles.
   If you are not comfortable checking the tire pressure on your MITSUBISHI, proceed with caution to have your tire pressure checked by a professional tire technician.*
   Fill your tires to the proper placard tire pressure, either with the help of your nearest tire service center or by using a tire air supply at a nearby filling station.
   If necessary, have any damaged tires, as well as the MITSUBISHI TPMS system, serviced at your nearest tire service center.
   The TPMS light should turn off within several minutes after reinflating the tires to their recommended pressure.

*Checking tire pressure before you've driven on them, when the tire is "cold," is always the best way to get the most accurate reading for your MITSUBISHI TPMS.